Product appearance and overview
The material pressing bevel cutter B can cut V-shaped grooves and bevels, and process soft glass, PVC, honeycomb board, KT board, vertical corrugated paper, gray cardboard and other materials.
Component Description
Ear: used to lock the handle.
Handle: bevel cutting blade.
Top screw: used to fix the blade.
Body: connects the handle and the blade.
Material pressing assembly: presses the cutting material.
Material pressing block: clamps the blade.
Installation Dimensions
Installation Diagram
Instructions for use and debugging
Installation and removal of the blade
- Blade installation
Loosen the top screws (two in total) and remove the cutter head. Loosen the M4 screws and remove the cutter block.
Put the blade into the blade slot. The protruding length of the blade is 17mm. Pay attention to the direction of the blade during installation. Tighten it after inserting the blade (pay attention to the gap between the blades when tightening. If the gap is too large, the blade will easily fall out).
Finally, connect the cutter head with the blade installed to the cutter handle and tighten the top screw to complete the installation.
-Blade removal
Loosen the two M4 screws and the blade can be removed after it is loose.
Precautions
1. Non-professionals are not allowed to disassemble the blade head
2. The blade is sharp, please be careful when installing.
Order Model
Product Parameters
| Order Model | Perce91196 |
| Cutting thickness/mm | 10 |
| Overall dimensions/mm | W49*H220*D40 |
| Weight | 0.5 |
Bevel Cutter Delivery Configuration
Bevel Toolholder
Options and accessories
Bevel Toolholder
Bevel Head
Pressing components
Single Edge Blade
Reviews
There are no reviews yet.