Perce 91206 Double blade positive angle bevel cutter

Product appearance and overview

The double blade positive angle bevel cutter can clamp the double blades to cut V-shaped grooves and bevels, and process soft glass, PVC, honeycomb board, KT board, vertical corrugated paper, gray cardboard and other materials.

Component Description

Ear: used to lock the handle.

Handle: bevel blade
Top screw: used to fix the blade.

Brace: connects the handle and the blade holder.

Press block: the blade holder part, clamps the blade.

Installation Dimensions

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Installation Diagram

Instructions for use and debugging

Installation and removal of blades

- Blade installation

Loosen the top screws (two pieces) and remove the blade.

Loosen the M4 screw and put the blade into the blade slot. The blade protrusion length is 14.5mm. Pay attention to the direction of the blade when installing.

After inserting the blade, the depth of the blade can be adjusted by the top screw. After adjusting to the appropriate depth, tighten the M4 screw (pay attention to the gap of the blade when tightening. If the gap is too large, the blade will easily fall out).