The electric drawing brush can draw various patterns and tool path motion trajectories on the cut material.
The basic principle of the electric drawing brush is to use an electromagnet to drive the drawing brush to contact the cut material, thereby drawing a given trajectory.
Component Description
Fixed seat: connected to the machine tool
Slider: used for linear motion brush
Clamping block: fasten the brush
Brush: draw the pattern trajectory
Installation dimensions
Installation Diagram
Use debugging and instructions
（1）Brush installation
Loosen the M4 screw, place the brush on the clamping block, adjust the brush to the appropriate position, and tighten the M4 tightening screw.
（2）Refill replacement
Twist out the cap from the pen holder, insert the refill, and tighten the cap to complete the refill replacement.
（3）Oiling and maintenance
Apply lubricating oil or grease to the guide rail to keep it sliding smoothly.
Wiring Instructions
Black line 1：DC24V+
Black line 2：DC24V-
Precautions
- Before powering on, make sure the wiring is correct
- Non-professionals are not allowed to disassemble the internal structure
- Lubricate the guide rail in time to ensure the service life of the brush
Product Parameters
Order Model | Perce 91127 |
| Drive mode | electric |
| Stroke/mm | 10 |
| Overall dimensions/mm | W34*H140*D96 |
| Weight kg | 0.6 |
Shipping Configuration
Perce 91127 Electric Paintbrush
Perce 95028 Refill
Optional accessories
Perce 95027 Pen Holder
Perce 95028 Refill
Multi-faceted appearance
Reviews
There are no reviews yet.